Profesionalni 3D tiskalnik Witbox2 BQ

PRINTING SPEED
Maximum: up to 200 mm/s*
*Subject to materials, profiles and software used.

OPERATING CONDITIONS
Optimum operating temperature range 15 ºC to 25 ºC.

RESOLUTION
Resolution: Up to 20 microns

DIMENSIONS
Printer without PLA spool: (X) 508.06 x (Y) 393.38 x (Z) 461 mm
Printer with PLA spool: (X) 508.06 x (Y) 485.08 x (Z) 461 mm
Exterior box: (X) 610 x (Y) 510 x (Z) 709 mm
Print volume: (X) 297 x (Y) x 210 (Z) 200 mm

MATERIALS
1.75 mm diameter filaments: PLA, wood, bronze, copper and FilaFlex.

EXTRUDER MECHANICS
Own design extruder with Double Drive Gear traction setting and filament guide to maintain compatibility with flexible or soft filaments.
Hot-end designed for easy maintenance
0.4mm nozzle for 1.75mm filament
Finned dissipator with axial fan controlled by firmware
Printed cooling blower

GENERAL MECHANICS
Powder-coated steel frame
Hard chrome bars for the X and Y axes
Lineal ball bearings for the X and Y axes
4-thread ballscrew with direct coupling to motor on the Z axis
Rails and ball runners on the Z axis
Powder-coated steel supports and moving parts
A4 glass cold bed (305 x 220 mm)
3-point print bed levelling system with shock absorber
Rapid system for changing the print bed using neodymium magnets

ELECTRONICS
BQ Zum CNC controller
BQ Zum Inductive Sensor to aid levelling of the bed
BQ Zum LCD Smart Controller
Power supply 12V 150W
100K thermistor on the hot-end
Heat cartridge 12V 40W
Optimised ribbon cables

SOFTWARE
Marlin-derived firmware designed by BQ
New features: auto-levelling, manual levelling using inductive sensor designed exclusively for 3D printing, idle mode Improved user interface
Recommended environment: Cura Software, Slic3r.
Files accepted: .gcode
Compatible operating systems: Windows XP or later, Linux and Mac OS X or later

COMMUNICATIONS
Standard SD card reader
Type B USB port

BOX CONTENTS
Witbox 2 3D printer
Quick Start Guide and Warranty
Cold print bed
One set of two keys
Two side panels and one top panel
USB cable
European power cable
UK power cable
Spool of PLA filament 1,75mm
Metallic spool-holder
SD card (with preloaded 3D models)
Printed test piece
Four support legs for the printer
Five PTFE tubes
Two cleaning needle
Spatula
Metal bristle brush for cleaning
Allen keys of 1.5, 2, 2.5 and 4 mm
Carriage immobiliser for transportation

OTHERS
Stackable
Door with safety lock
Rear filament supply system inspired by the Fibonacci curve

WEIGHT
Product plus box: 34Kg